Plastic wiring junction box with 7 junctions
Overall dimensions: 8″ x 3 1/4″
Everything you need to mount full leafs springs on your home built trailer or converted trailer.
Kit includes:
- 2 Leaf springs 43″ leaf springs, spring rate 287lbs, 2.5″ wide, with poly bushings.
- 2 front 2.5″ hangers with 9/16″ bolt, 2 rear hangers with 1/2″ bolt, 4 Shock brackets.
- 2 Hydro shocks with black boots.
- 2 Spring plates design buy us to adapt the 2.5″ springs to the standard trailer 2 3/8″ axle tube.
- set of U-bolts and nuts
- Shackles
- 2.5″ universal spring pad.
- Attaching hardware.
3/4″ LED Clearance/Side Marker Light
- 8-16 volt operating range.
Trailer jack SW,with weld on two position pipe mount, the jack is also removable.
Retracted: 14.5″
Extended: 29.5″
Bracket to top: 12″
Mount OD: 2.505″
Pin: 9/16″
Lockable Hard top lids for
M1oo, M416, M101CDN2
$1,195.00 includes all attaching hardware, gas struts, seal etc so everything you need to mount to your trailer, Primed ready for paint, Lid weights 125 lbs 150lbs crated weight on check out is just for shipping calculations code.
Please allow 2-3 weeks before shipping at this time.
Truck shipping only, or pick up at our location, installation available at our location.
take out insert and flip over.
Replacement Lights 2 for $3
Trailer Fenders:
39″l x 14.5″H x 12″w 14ga cold rolled steel.
$99.95 a set add $40.00 for black wrinkle powder coating.
Buy a 4 Pack of NATO Fluid CANS and get free shipping!!
They are all in Green and are Labeled “NOT FOR FUEL USE” they include the safety lid locking pins, Spouts are not included.
$192.00 4pack
NATO 20L Fluid Can
They are all in Green and are Labeled “NOT FOR FUEL USE” they include the safety lid locking pins, Spouts are not included.
$48.00 per can
Description:
The bracket is aluminum and tig welded with a stainless steel QR strap. Dimensions: 8″ wide x 8″ high. The tank diameter is 8″
The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate tire reading via the simple movement of a sliding valve.
- Corrosion resistant brass/stainless deflator tool
- Quality bronze Bourdon Tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
- Fully geared, solid brass precision movement
- Protective rubber gauge guard
- Easy to read dial with 1 PSI increments
- Thoroughly designed and tested to ensure accuracy
- Includes protective canvas pouch and instruction sheet
Coming in a compact carry case, the Speedy Seal includes all the components necessary to repair tubeless radial or cross ply tires, without removing the tire from the vehicle or rim.
This includes a quality pencil type tire gauge with dual pressure range and dual chuck, insertion and reamer tools, lubricant, additional valve accessories and 30 self vulcanizing repair cords for complete air sealing.
Spare repair cords are also available in packs of 50 from ARB, so before you head out on your next 4×4 trip, make sure you’ve got all the necessary equipment for making emergency repairs.
- Quality pencil type tire gauge with dual pressure range and dual chuck
- Spring steel insertion needle
- Lubricant for easier tool insertion
- Additional valve accessories, ie valve core tool, spare valves and valve caps
- Hardened steel reamer tool
- 30 self vulcanizing repair cords for complete air sealing
- Allen keys
- Quality high visibility orange blow molded case to keep contents protected
TWO SETS OF CLAMPS PER PACKAGE
• Hold round objects up to15”(381mm) in diameter.
• Holds tools and equipment measuring up to 30” (762mm) in linear distance.
• Each clamp set supports a safe working load of 150lbs (68kilos), with a break-strength of 300lbs(176kilos).
• Each base of the clamp mounts with four #10 screws or bolts (not included)
MADE IN USA
- Holds objects ½” to 4.5” (13 x 114 mm)
- Mounting base 4.5” x 1.5” (114 x 38 mm)
- Attaches with two ¼” (6 mm) bolts or #14 wood or sheet metal screws
- One clamp supports a safe working load of 50 lbs. (23 kilos); two clamps support a safe working load of 100 lbs. The break strength of each clamp is 150 lbs.
- Blister pack holds two clamps
- Holds objects 2 1/2″ to 9 1/2″ (64mm to 240mm) in diameter.
- The QUICK FIST clamp is made of transportation grade rubber
and is not bothered by heat or cold and is UV resistant. - Mounting base measures 6″ x 7/8″ (152 x 22mm).
- Attaches easily with 3 # 10 bolts or screws (not provided)
- One clamp supports a safe working load of 50 lbs. (23 kilos).
MADE IN THE USA
Holds objects 2.75” to 3.50” (70mm to 89mm) in diameter .
- The QUICK FIST clamp is made of transportation grade rubber and is not bothered by heat or cold and is UV resistant.
- The mounting base is 4.5” x 1.25” (31.75mm x 114.3mm).
- Attaches with one ¼” bolt (6mm).
- One clamp supports a safe working load of 50lbs (23kilos). The break strength is 150lbs (68 kilos).
Holds implements from 1 ¾” to 2 7/8” (44 to 73mm) in diameter.
- QUICK FIST clamps are made of transportation grade rubber and are not affected by extreme cold or heat. The clamp is also UV and salt resistant.
- Mounting base measures 3 ½” x 1” (89x25mm).
- Attaches with two ¼” bolts or screws (not included)
- One clamp supports a safe working load of 35lbs (16 kilos).
MADE IN THE USA
MINI QUICK FIST (Package of 2 clamps)
MOUNTS TOOLS AND
EQUIPMENT ON ANY VEHICLE
- Holds objects from 5/8″ to 1 3/8″ (16 to 35mm) in diameter.
- Mounts easily with a single bolt or screw.
- Use on Military, law enforcement, fire, ATV’s, RV’s, farm and 4×4 vehicles.
- Works great to mount fishing poles, brooms, small flashlights and hand tools. Can also used as a pipe standoff (maximum sustained heat of 180 degrees F.)
- Each clamp supports a safe working load of 25lbs (11 kilos); two clamps hold 50lbs (23 kilos).
- Blister pack holds two clamps.
MADE IN THE USA
Holds objects 1″ to 2 1/4″ (25mm to 57mm) in diameter.
- Mounts easily to keep shovels, axes, hoses, rifles/shotguns, fishing gear and other tools or implements securely in place.
- Use on work vehicles, off road trucks, military equipment, law enforcement vehicles, fire trucks, 4x4s, ATVs, RVs, boats or on any wall.
- Can also be used as a pipe stand-off (particularly suitable for marine applications, as the QUICK FIST will not rust or corrode). Do not use on exhaust pipes.
- Each clamp supports approximately 22lbs (10kilos).
- Blister pack hold two clamps.
- Not affected by heat or coldness
MADE IN THE USA
New Design ready to ship!!
Max Coupler is built to function in all situations you may encounter on your adventures, and stay completely quiet throughout its cycles. This allows you to focus on the trail ahead and not be distracted by any clunking noises that leave you wondering if your trailer is still securely attached.
- The Max Coupler is a Class III coupler rated at 6000 lbs
ARB Fridge/Freezer $850.00 -
ARB fridge freezers are the ideal way to keep your food and beverages chilled or frozen on your 4×4 adventures, regardless of ambient conditions. Not to be confused with less effective 12 volt ‘coolers’, the ARB unit is a true refrigerator/freezer. Own one and you’ll never again find your lunch water- logged by shifting ice, and there’ll always be a cold drink on hand during the sweltering summer months.
Two separate power cords are included, one for AC operation (120 volt) at home, and one for DC operation (12/24 volt) in your vehicle. The all-new 50 qt model is able to maintain sub-freezing temperatures in 90° F heat, while only drawing 0.87 amps per hour from a 12 volt power source… that’s less than a single headlamp draws!
- Designed to carry up to 50lbs
- Made from high quality 900 denier
- Water resistant interior coating for bad weather
- All buckles and straps are double stitched
- Built in flap for storage of trash bags, gloves, straps, etc.
- Drainage hole for those unexpected leaks
- Slide over nylon covers to protect buckles for UV rays & dirt
- Fits a standard 30 gallon trash bag for liner for ease of dumping
- Designed to fit a 31″ up to a 40″ tir